- Model NO.: Series SS500
- Spring Brand: Kern-Liebers
- Mounting: Floor, Wall, Bench, Truck
- Material: 3.0mm Cold Steel
- Color: Stainless
- Specification: Series SS500
- HS Code: 84253990
- Drive Type: Spring
- Construction: All Bolted Unitized
- Inlets: 1/4", 5/16", 3/8", 1/2",3/4",1"
- Surface Finish: Powder Coated
- Trademark: Yamasaki
- Origin: China
Features of reel
SS500 stainless steel for the whole series of large frame reels,
with application requirements and superior acid resistance to seawater
corrosion, to meet food, pharmaceuticals, petrochemicals, offshore
environment, industry and other special fields.
Fluid path: : 1 ", 1 1/4", 1 1/2 "
The Specifications:
| Appilication | Pressure Mpa(psi) | Hose inner dia. mm (In) | Hose length m (ft) | Reel  inlet | Reek outlet | Pin No.     (with hose) | Pin No.     (without hose) |
| Air/Water/Oil | 2(300) | 25(1) | 45(149) | 1" | 1" | - | SS500020700 |
| Air/Water/Oil | 2(300) | 32(1 1/4) | 30(100) | 1 1/4" | 1 1/4" | - | SS500020800 |
| Air/Water/Oil | 2(300) | 38(1 1/2) | 25(75) | 1 1/2" | 1 1/2" | - | SS500020900 |
| Air/Water/Oil | 2(300) | 25(1) | 45(149) | 1" | 1" | - | SS650020700 |
| Air/Water/Oil | 2(300) | 32(1 1/4) | 30(100) | 1 1/4" | 1 1/4" | - | SS650020800 |
| Air/Water/Oil | 2(300) | 38(1 1/2) | 25(75) | 1 1/2" | 1 1/2" | - | SS650020900 |
To ensure the safe use of reel, it is necessary to do:
   Will temporarily need not operation area or redundant hose or cable recycling to coil plate, this not only make the scene becomes neat and orderly, prolong the service life of the hose or cable, but also avoid the trip may be caused by hose or cable safety accidents.Hoses or cables in recycling, it must be under the condition of the human assisted to slowly recover the reel, in so doing, reflected the operating personnel's professional quality, and to a kind of hoses, cables and equipment protection.
Warning:Is strictly forbidden in the absence of human assisted by a spring's own natural retract hose or cable tension into the roll disc, it is very dangerous, is likely to cause the damage of the reel internal spring, and the hose or cable rapid retract time of spin phenomenon caused by the unexpected injury.Therefore, you must put an end to this kind of behavior!
Caution:Installation suggest not more than 4.5 m.
To ensure the quality of the normal function of the reel, and life, must be regular maintenance. Because the roll drive part is installed in the open or half open space use, inevitably affected by dust and water vapor erosion, so it requires that we regularly float ash on the surface of cable reel or hose, and the possibility of contamination, the oil for polishing the mop, keep the surface clean and dry. Need to periodically check whether the install reel and other parts of the fastener is loose, if there are any loose phenomenon, tighten needs in a timely manner, so as not to affect the normal use of the reel, which may lead to the production delays.
Hose and cable or provided by the users themselves, or install bought by manufacturers, their active suppliers use fixed number of year, more than life need to be replaced in time, to ensure the normal use of equipment.
We supply the related service parts which are suitable for all sold reels. Service parts at extra cost, beyond the quality guarantee period, for more details please consult the manufacturer or its official authorized dealers, agents.
Variable Pump Injection Molding Machine
We are professional plastic Injection Molding Machine manufacturer for all kinds of production requirements, Clamping force from 50 to 1680T, injection weight from 50 to 10000g. With best price/ performance ration of any machine on the market.
Some of the important features:
Clamping system: Faster response, stable and high rigidity
Injection system: Accurate and flexible, lower rejection rate
Control system: Computer and simple operation, molding data memory system
Power system: Energy saving, high efficient and precise
Metal parts: The thickness of our frame, metal plate and wallboard are thicker than other company.
Main advantages of variable pump injection molding machine:
1.Energy saving
2.Fast system response and short cycle times
3.Greatly decreases oil temperature of the system
4.Smoother mould opening and locking, prolonging the life of the machine and the mould
5.Prolongs working life of the hydraulic oil and hydraulic components, thereby reducing frequency of maintenance and maintenance costs
6.The extra oil filtration requirements are met by special imported filter components
Solution Plastic Injection Molding Machine
Solution Plastic Injection Molding Machine, Plastic Bowl Injection Molding Machine
Ningbo Konger Machinery Co., Ltd. , http://www.kongerchina.com