The future development direction of the six models of domestic CNC punch press

In recent years, the market demand for domestic high-end CNC machine tools has increased, and new types of CNC machine tools have become frequent. CNC punching machine has a CNC control system, which can arbitrarily set the motion mode and speed of the slider according to the processing method. According to market changes, the future direction of domestic CNC punch press is expected to have the following models.

1, CNC punch screw <br> <br> working machine is servo motor driven by AC servo slide by the screw, the position of molding the bottom dead center position may be provided by the data reading means performs control to position control device set. Therefore, the thermal expansion and elastic deformation of the machine will not affect the accuracy of the product, adjust the most suitable way of slider movement and control the position of the dead point in an extremely small unit. Therefore, the high-precision high-performance cutting-free forming screw servo press adopts a hydraulic motor and an accumulator for torque control. The bottom dead point position control can reach micron level, which is an energy-saving and environmentally friendly machine. .

2 crankshaft servo punch

CNC punch press combined with crankshaft punch and AC servo motor. This type of press uses a servo motor to replace the clutch brake and flywheel on the original punch. This kind of punching machine has the characteristics of the servo punch which can be arbitrarily set by the slider movement mode, and has the torque characteristics of the ordinary mechanical punching machine shown in FIG. 3 . However, its working energy will not decrease in the low speed area.

3、Reforming press

Re-formation is a powerful tool for cutting without forming. Forging forging in cold forging is an example of controlling the plastic flow of a material by controlling the motion and time diagram of multiple punches and dies. The precision and formability of the product can be improved and even the number of processes can be shortened.

Re-formation can roughly be divided into two major categories: emphasis on the versatility of the punch press using double-acting molds; multiple-product molds can be assembled and disassembled easily using the punch press. Recently, not only in the forging process, but also in the diversification of the forming of the sheet metal and the forging and the improvement of the capability of the composite forming, the punching machine is required not only to have a multi-action performance but also to have a high versatility.

4, closed forging punch

The use of occlusal forging dies and universal forging presses has been widely used in the formation of star and cross couplings. Its mold structure has occlusive function and coordination function. Other occlusion forging presses that can save piping time during mold assembly can be divided into two categories: these functions are all in the press and the upper and lower cylinders are on the punch and the coordinating mechanism is on the mold base in two forms.

5, plate forging punch

With the popularization of plate forging and forming, forging presses are required to perform deep drawing or shorten the number of works. Therefore, sliders and tables must be provided with cylinders. The original occlusive forging is almost always using high-capacity atmospheric pressure. In addition to the atmospheric pressure required for the forging work, the sheet forging also requires sequential actions, self-locking, and other functions.

6, gear forming punch

Helical gears for the formation of multiple hydraulic presses. There are a total of 5 hydraulic drive units for slide press drive, 2 sliders and 2 worktables. The initial stage of forming is the same as that of the inner ring of the atmospheric pressure ram type. The male mold is inserted into the concave tooth space in the occlusion and the material flows from the bottom to the initial shape. In this state, the core rises and the diameter of the core in the center of the material narrows. At this time, there is a new space in the inner diameter portion of the workpiece, and a new plastic flow can be generated, so that the increased pressure material can fill the toothed tip portion. The products processed by this method have a processing pressure of only 1300 MPa, and the dents and burrs of the toothed parts are extremely small. The gears that control the formation of the material flow through the compounding process can reach JIS Class 3~4, which is very close to the high value-added non-cutting forming.