Ruibai LED display technology advantages

Ruibai LED display technology advantages:

♦ Single point calibration technology

The single-point calibration system controls each pixel individually, including its brightness and color control, to achieve unprecedented uniformity and produce the sharpest image. At the same time, combined with EXV's original ICC/IBC intelligent color brightness adjustment technology, the whole screen brightness and chromaticity correction can be ensured to ensure the consistency of brightness and chromaticity of the whole screen after long-term operation and aging.

♦ Dual redundant power supply

The DMVision P series unit cabinet adopts dual redundant power supply mode. In the case of a certain power supply failure, the cabinet can still ensure the normal operation of the cabinet, thus ensuring the safety of the cabinet power supply, and the high-definition LED electronic screen quotation form.

♦ Dual signal hot backup

The DMVision P series unit cabinet adopts dual signal hot backup input mode. Each unit cabinet control module will automatically detect the integrity of the two input signals. When the main input signal is in good integrity, the system uses the main input as the input source by default. When the main input signal is incomplete or the signal is faulty, the system automatically switches to the standby input signal, and the switching time is <0.5 seconds.

♦ Super high refresh rate

The high-speed refresh rate of DMVision P series display can fully meet the needs of high-speed camera and high-definition TV broadcast. When the display reaches 2000 Hz or above, the picture is stable without ripples and no black screen. It should respond to the dynamic display picture, the image edge is clear, and the image information is accurate and true. Restore.

♦ High brightness and adjustable

With the light-sensing device, the environment can be adaptively adjusted without affecting the display effect due to strong ambient light.

♦ High contrast

The unique black mask treatment of DMVision P series display products greatly enhances the screen contrast; the black mask can also effectively improve the illuminating degree of the LED lamps, and minimize the side illumination difference of each LED lamp; When viewing the screen, the brightness is uniform;

♦ Color gamut conversion

When a certain display screen appears unnatural and natural, use the light to get the original color gamut, and then convert it into the desired target color gamut, so that the color of the image tends to be true and natural.

♦ Solid state cold light source, long life

The LED is a solid cold light source with a service life of more than 100,000 hours. It is more than 10 times the service life of the traditional light source. The LED performance is stable and can work normally in the environment of -30 °C ~ +70 °C.

♦ Large viewing angle

Vertical and horizontal 160-degree ultra-wide viewing angles allow viewers to achieve superior display at all angles.

♦ True seamless stitching technology

The LED screen can be spliced ​​in any direction, any size, and any shape. Compared with the rear projection and the splicing of the liquid crystal, there is no difference in brightness between the units or stitching black seams, showing a perfect visual effect. The exquisite unit structure ensures the consistency of the point spacing; the picture is uniform, without separation, no black lines, no missing information, realizing a seamless seamless splicing screen.

♦ The screen is ultra-light, ultra-thin and space-saving

The advantage of the LED display compared with the rear projection is that the rear maintenance space is small, generally within 0.8m, and can be embedded in the existing wall without changing the structure of the house.

♦ Lower maintenance costs later

LED displays usually have a very low defect rate, and even if there is a fault, only the module or power supply needs to be replaced, and the maintenance cost is small.

What are the issues to be aware of when choosing to use the LED display? Here are some explanations for you:

1 , the display life is detailed

The life expectancy is 100,000 hours. The technical data issued by the LED material manufacturer indicates that the life of the LED illuminator is 10 million hours under ideal conditions. The ideal state refers to the LED illuminator from illuminating to completely illuminating under constant voltage and constant current in the laboratory. Time, 10 million hours is equivalent to 11 years. The amount of water in a wooden barrel is determined by the lowest board. The LED display currently uses a civilian-grade device with a service life of less than 8 years. The function of the display screen is to watch. When the display is lit only when it is clear at night, it cannot be said that it is qualified and valuable. A car can be opened for 15 years, and if it is idle for 3 years, it will be scrapped. The environment and method of use have a significant impact on the life of the product.

2 , price selection

Choosing an LED display depends on the price/performance ratio rather than simply looking at the price. Because the price on the market is very chaotic, many quotations are not enough for our production costs. This shows that there are problems with the raw materials used, but it is possible to clear the warehouse. Therefore, customers must understand the situation of the company when purchasing products. How much does the display cost cost? We can't just buy a cheap product, or you won't be able to pay for it.